Shower Bundle - Sizes 18" and 24"
Shower bundle Includes 2 bars in sizes:
18” for entry wall installation
24” for side wall installation
Entry Wall Grab Bar:
Why is this grab bar placement important?
An entry grab bar is the most important shower grab bar because most falls occur at the point when the person is making the transfer from two different heights, usually while wet.
This grab bar is critical to steady the transition between the bathroom floor and the shower floor, where there is usually a small lip or ledge to step over.
An entry grab bar will help overcome the fear one has when putting their entire body weight on one leg while stepping onto a new surface that may be wet or slippery.
The entry grab bar can also be used for pulling oneself safely out of a sitting position while in the shower (such as when sitting in a shower chair or on a shower bench).
An entry grab bar will be much sturdier than dangerously hanging onto bathroom fixtures, glass doors, or towel bars, which have limited weight capacities and virtually no grip.
Side Wall Grab Bar (side opposite of entrance):
Why is this grab bar placement important?
A side wall grab bar is important for maintaining balance when standing in and moving around the shower, especially with eyes closed.
Useful in shower environment where the individual is likely to face both forward and backwards and move within the lateral plane of the shower.
Our styles:
Standard
The standard straight grab bar is perfect for residential or commercial settings. This is our most popular grab bar as a result of its low cost and durable performance.
Features:
1.25” Diameter Bars
ADA & ANSI Compliant: 1 ½” wall clearance and supports up to 500 lbs.
Concealed screw design for a more decorative look.
Snap-on flange covers with flanges featuring multiple anchoring points to facilitate installation.
Mounting hardware included.
(Length is measured from centerline to centerline of each mounting flange. Add 3″ for overall length).
Helios
The Helios grab bar is swiftly becoming the most sought-after bar among our high-end commercial and residential customers. This bar with it’s chic construction and art deco design, reflects an aesthetic of streamlined symmetry while providing trusted support. It’s crisp lines and sleek geometric design brings a stylized look to any space. These can often be found in restrooms within high-end spas, salons. The variety of finishes allow for a multitude of aesthetics from minimalist, spa-chic, high glamor, urban modern, contemporary, to art deco.
Features:
1.25″ Diameter Bars
ADA & ANSI Compliant: 1 ½” wall clearance and supports up to 500 lbs.
Concealed screw design for a more decorative look.
Premium flange mount facilitates installation. Includes 3 set screws on post, which allow pre-mounting to the wall before attaching the bar.
Twist-on flange covers.
Mounting hardware included.
(Length is measured from centerline to centerline of each mounting flange. Add 3.1″ for overall length).
Supreme
The supreme series grab bar is one of the most popular, high-end, and luxurious grab bars in our decorative and designer grab bar collection. This series grab bar is typically placed in higher end residential bathrooms and luxury commercial restrooms. This exclusive design features two decorative end posts on each end of the grab bar, creating an upscale and modern appearance.
Features:
1.25″ Diameter.
ADA & ANSI Compliant: 1 ½” wall clearance and supports up to 500 lbs.
Snap-on flange covers conceal screws for a more decorative look.
Mounting flanges feature a 12-hole pattern design to facilitate installation.
Each flange post includes 3 set screws on post, which allow pre-mounting to the wall before attaching the bar.
Includes hardware pack of (6) 2-inch stainless steel screws.
Shower bundle Includes 2 bars in sizes:
18” for entry wall installation
24” for side wall installation
Entry Wall Grab Bar:
Why is this grab bar placement important?
An entry grab bar is the most important shower grab bar because most falls occur at the point when the person is making the transfer from two different heights, usually while wet.
This grab bar is critical to steady the transition between the bathroom floor and the shower floor, where there is usually a small lip or ledge to step over.
An entry grab bar will help overcome the fear one has when putting their entire body weight on one leg while stepping onto a new surface that may be wet or slippery.
The entry grab bar can also be used for pulling oneself safely out of a sitting position while in the shower (such as when sitting in a shower chair or on a shower bench).
An entry grab bar will be much sturdier than dangerously hanging onto bathroom fixtures, glass doors, or towel bars, which have limited weight capacities and virtually no grip.
Side Wall Grab Bar (side opposite of entrance):
Why is this grab bar placement important?
A side wall grab bar is important for maintaining balance when standing in and moving around the shower, especially with eyes closed.
Useful in shower environment where the individual is likely to face both forward and backwards and move within the lateral plane of the shower.
Our styles:
Standard
The standard straight grab bar is perfect for residential or commercial settings. This is our most popular grab bar as a result of its low cost and durable performance.
Features:
1.25” Diameter Bars
ADA & ANSI Compliant: 1 ½” wall clearance and supports up to 500 lbs.
Concealed screw design for a more decorative look.
Snap-on flange covers with flanges featuring multiple anchoring points to facilitate installation.
Mounting hardware included.
(Length is measured from centerline to centerline of each mounting flange. Add 3″ for overall length).
Helios
The Helios grab bar is swiftly becoming the most sought-after bar among our high-end commercial and residential customers. This bar with it’s chic construction and art deco design, reflects an aesthetic of streamlined symmetry while providing trusted support. It’s crisp lines and sleek geometric design brings a stylized look to any space. These can often be found in restrooms within high-end spas, salons. The variety of finishes allow for a multitude of aesthetics from minimalist, spa-chic, high glamor, urban modern, contemporary, to art deco.
Features:
1.25″ Diameter Bars
ADA & ANSI Compliant: 1 ½” wall clearance and supports up to 500 lbs.
Concealed screw design for a more decorative look.
Premium flange mount facilitates installation. Includes 3 set screws on post, which allow pre-mounting to the wall before attaching the bar.
Twist-on flange covers.
Mounting hardware included.
(Length is measured from centerline to centerline of each mounting flange. Add 3.1″ for overall length).
Supreme
The supreme series grab bar is one of the most popular, high-end, and luxurious grab bars in our decorative and designer grab bar collection. This series grab bar is typically placed in higher end residential bathrooms and luxury commercial restrooms. This exclusive design features two decorative end posts on each end of the grab bar, creating an upscale and modern appearance.
Features:
1.25″ Diameter.
ADA & ANSI Compliant: 1 ½” wall clearance and supports up to 500 lbs.
Snap-on flange covers conceal screws for a more decorative look.
Mounting flanges feature a 12-hole pattern design to facilitate installation.
Each flange post includes 3 set screws on post, which allow pre-mounting to the wall before attaching the bar.
Includes hardware pack of (6) 2-inch stainless steel screws.
Shower bundle Includes 2 bars in sizes:
18” for entry wall installation
24” for side wall installation
Entry Wall Grab Bar:
Why is this grab bar placement important?
An entry grab bar is the most important shower grab bar because most falls occur at the point when the person is making the transfer from two different heights, usually while wet.
This grab bar is critical to steady the transition between the bathroom floor and the shower floor, where there is usually a small lip or ledge to step over.
An entry grab bar will help overcome the fear one has when putting their entire body weight on one leg while stepping onto a new surface that may be wet or slippery.
The entry grab bar can also be used for pulling oneself safely out of a sitting position while in the shower (such as when sitting in a shower chair or on a shower bench).
An entry grab bar will be much sturdier than dangerously hanging onto bathroom fixtures, glass doors, or towel bars, which have limited weight capacities and virtually no grip.
Side Wall Grab Bar (side opposite of entrance):
Why is this grab bar placement important?
A side wall grab bar is important for maintaining balance when standing in and moving around the shower, especially with eyes closed.
Useful in shower environment where the individual is likely to face both forward and backwards and move within the lateral plane of the shower.
Our styles:
Standard
The standard straight grab bar is perfect for residential or commercial settings. This is our most popular grab bar as a result of its low cost and durable performance.
Features:
1.25” Diameter Bars
ADA & ANSI Compliant: 1 ½” wall clearance and supports up to 500 lbs.
Concealed screw design for a more decorative look.
Snap-on flange covers with flanges featuring multiple anchoring points to facilitate installation.
Mounting hardware included.
(Length is measured from centerline to centerline of each mounting flange. Add 3″ for overall length).
Helios
The Helios grab bar is swiftly becoming the most sought-after bar among our high-end commercial and residential customers. This bar with it’s chic construction and art deco design, reflects an aesthetic of streamlined symmetry while providing trusted support. It’s crisp lines and sleek geometric design brings a stylized look to any space. These can often be found in restrooms within high-end spas, salons. The variety of finishes allow for a multitude of aesthetics from minimalist, spa-chic, high glamor, urban modern, contemporary, to art deco.
Features:
1.25″ Diameter Bars
ADA & ANSI Compliant: 1 ½” wall clearance and supports up to 500 lbs.
Concealed screw design for a more decorative look.
Premium flange mount facilitates installation. Includes 3 set screws on post, which allow pre-mounting to the wall before attaching the bar.
Twist-on flange covers.
Mounting hardware included.
(Length is measured from centerline to centerline of each mounting flange. Add 3.1″ for overall length).
Supreme
The supreme series grab bar is one of the most popular, high-end, and luxurious grab bars in our decorative and designer grab bar collection. This series grab bar is typically placed in higher end residential bathrooms and luxury commercial restrooms. This exclusive design features two decorative end posts on each end of the grab bar, creating an upscale and modern appearance.
Features:
1.25″ Diameter.
ADA & ANSI Compliant: 1 ½” wall clearance and supports up to 500 lbs.
Snap-on flange covers conceal screws for a more decorative look.
Mounting flanges feature a 12-hole pattern design to facilitate installation.
Each flange post includes 3 set screws on post, which allow pre-mounting to the wall before attaching the bar.
Includes hardware pack of (6) 2-inch stainless steel screws.